2017 © Copyright Proloc / All Rights Reserved.
    ADHESIVES
    SEALANTS
    PU FOAMS
    AEROSOLS

/ Product Category / Adhesives / D2 White Glue Fast Adhesive

D2 White Glue Fast Adhesive

Proloc D2 is very strong wooden homo-polymer glue which is polyvinyl basic and gets transparent when it gets dry.


Properties

  • Fast curing.
  • Low press time.
  • Resistant to water according to D2-DIN EN204
  • Extremely high bond strength on numerous substrates.
  • Very good resistance to chemicals.
  • Excellent resistance to moisture and weather conditions.
  • Nonshrinking.
  • Low odour.

Applications Area

It is suggested that the time of staying open shall be 3-4 minutes and pressure that will be applied shall be 1,8 kg/cm2.

At the Cold-Press Machines and Manual Use the press time should be arranged accordingly with working temperature. Below you can find the relation with temperature and press time;
 

  • 5 C 65 minutes
  • 10 C 60 minutes
  • 20 C 55 minutes


D2 is designed to hold against low levels of moisture in the wood to maintain its high bonding power. While the acceptable moisture content is 8 - 12 % the press time can be needed to be increased slightly accordingly.


Usable where high rate of moisture is a problem as dry films of D2 has potential to absorb water.


Tds









D2 White Glue Fast Adhesive

image


Proloc D2 is very strong wooden homo-polymer glue which is polyvinyl basic and gets transparent when it gets dry.



Properties


Application Area

It is suggested that the time of staying open shall be 3-4 minutes and pressure that will be applied shall be 1,8 kg/cm2.

At the Cold-Press Machines and Manual Use the press time should be arranged accordingly with working temperature. Below you can find the relation with temperature and press time;
 


D2 is designed to hold against low levels of moisture in the wood to maintain its high bonding power. While the acceptable moisture content is 8 - 12 % the press time can be needed to be increased slightly accordingly.


Usable where high rate of moisture is a problem as dry films of D2 has potential to absorb water.


Tds / Msds

E-mail : [email protected]